Automatism that allow to create the effect of dawning, day, dusk and night with independent regulation of times the dawn and the dusk. It has two independent exits the effect to dawn and to atardercer and other two but for the day and the night. V is connected directly to the network of 220 and each one of the exits can handle a load of 50 500W (only resistivas loads like light bulbs, resistance, etc). The time can be regulated of 1 to 120 seconds, or 1 to 120 minutes. With this module it can realize of repetitive and automatic form the complete and natural cycle of a day thanks to his four independent effects and their four channels.

The automatism for belenes allows to create of automatic form the effect “to dawn, day, dusk and night” with regulation of independent times the dawn and the decline. Of a its Bethlehem an effect to expectacular with this automatism of easy use.

Cover of spare part for the X10 switches of wall of our catalog. This frontal is the same that originally brings the switches of domótica wall x10 and serves to replace them in case of lost or deterioration.

Embellecedor frame compatible with the switches x10 of our catalog. Now it can place two together switches of domótica just by to change the independent marks by this double model. Also it is possible to be used with the switch of X10 blinds.

Embellecedor frame compatible with the switches x10 of our catalog. Now it can place three together switches of domótica just by to change the independent marks by this triple model. Also it is possible to be used with the switch of X10 blinds.

This module is basically a filter that settles in track DIN of the electrical picture to prevent that the X10 signals interfere vice versa in other neighboring facilities and, that the external signals do not interfere either in our circuit. At the same time it serves to connect the three phases in case of three-phase installation.

Module of control IP with two exits of relays and 4 digital entrances that allows him to control all class of sensors and to measure if these estan so working correctly with only acceding to direction IP. He is perfect to monitor devices of remote form. The control module is able to supervise the digital entrances, the temperature, the tension of feeding and the operativity of a remote equipment and each of these variables can activate or deactivate one or several action of the following: to act on some relay, to send email, to drive an acoustic warning device or to illuminate a LED in the frontal of the equipment. Its operation is simple will be able to connect any sensor to this module of control and to read its state of remote form through Internet and to detect right away if its operation is the correct one. The control module will be connected to router ADSL to and of remote form it will be able to control the sensors and to activate the power relays to ignite or to extinguish what wishes. Imaginese for example to be able to make sure without having to personally go the good operation of its refrigerator chamber, does not risk to lose thousands of Euros in merchandize by which it could be avoided easily with a simple remote verification.

Power supply of 15 V in track DIN especially recommended for the feeding of the unit of control IP S110450. The source provides 15 volts of DC without stabilizing and with a power of 4.6 watts.

This module maintains closed a free contact of tension while it has power supply. As soon as lack tension, the contact is abre. This module turns out suitable to generate alarms in the moment at which it lacks electrical current. It is possible to be connected to the entrance of the video recorders or of the Web servers of video so that at the moment at which the light goes away, it takes place an alarm and the engraver sends a warning email to us. Also it can be connected to any other unit, alarm system of control, etc. so that it acts when it lacks or it returns the light. DIN of 35 mm settles easily in track Tension of entrance: from 85 to 265 V AC. Contact of Exit: maximum of 32V and 100 mA.

This automatism ignites of automatic form the lights at dusk it extinguishes and them to the dawn. Unlike the programmers who do not compensate the variations of the length of the day, this switch works by the light, reason why always he works when puts the sun, neither before nor later. He is ideal for the lights and lamps of the outside, thus no longer it is necessary to be igniting and extinguishing the lights every day. He is placed in the outside and one settles in minutes. Maximum power recommended 2200 W. 220V 10A -50 Hertz. Ideal for gardens, garages and vestibules. Sensitivity can be fit between 5 and 45 lux. The commutation is by relay reason why he is compatible with any type of lamp.

This light with sensor this especially indicated for the nursery. It consists of a small lamp that ignites automatically when somebody happens ahead, or when it is made at night. Their minimum consumption and little power are ideal in the dormitory from but the small ones, that always want that there is one little of light at night. To the dawn, the lamp goes out single and to the dusk it ignites single. Another way of operation consists of which only it ignites again when it detects the passage of some person, going out to the 30 seconds, also exclusively when it is at night, remaining extinguished while there is sufficient light.

This telephone controller allows to ignite and to extinguish any electric appliance him with a simple telephone call. The device is connected in any plug and to the taking of the telephone, allowing that with a simple telephone call from any telephone, even the moving bodies, we pruned to ignite or to extinguish the heating, a water pump, a computer, etc. The device also allows to interrogate the present state, to know if to the apparatus this ignition or extinguished. Maximum power 2300 watts to 220V. It includes telephone cable of 3 meters and switch for the control manual. Programmable and adjustable access code to 4 or 6 codes of call, compatible with answering machines.