The module of basic lamp, comprises of any system of domótica, is a signal receiver X10 that goes fitted to the network and allows the ignition control and extinguished as well as to attenuate the luminosity of a lamp. W supports an intensity of 40w to 300. As simple as to connect it in the present plug of the lamp, and soon this is connected to the module. That is everything. Authentic domótica to connect and ready.

This module of lamp is a signal receiver X10, whose advantage is the one to embed in any box of registry or false ceiling. Ideal for ceiling lamps, you apply of wall, etc. is possible to be controlled the ignition, the dull one and to be attenuated the signal. This module of domótica is functionally equal to the module of lamp to fit, but it is connected directly to cables. Connections: Brown Phase, Blue Neutral and the Black is the Load.

The module of domótica for apparatuses is similar to the one of lamp but it allows intensities of until 2500w and on the contrary it does not take attenuator. It can locally be activated remotely or, that is to say in the same plug or at a distance. It is enough with connecting it in the plug of the apparatus to control.

The module of apparatus by cable is used to control remotely any apparatus or motor and only allows the dull ignition and. One settles in any box of registry through where they pass the cables of the apparatus that we want to control. The module of domótica of apparatus is functionally just as the module of apparatus to fit, being the only difference the way of connection and its so large minor. Connections: Brown Phase, Blue Neutral and the Black is the Load.

New domótico module of lamp that enrosca directly in the socket of the light bulb. Now it can control the ignition of any light or of interior or outside, since it is enough with enroscar the module in the place where before it was the light bulb. The module is of ignited type and extinguished and supports 100 a fully factored load of W. easy Domótica within reach of all.

Module that is used like interface for applications O.E.M in which it is wanted to implement the system of domótica X10. It is connected by means of a cable with connector RJ11. It takes built-in a LED that activates when detecting any X10 signal by the mains. This module also serves to cause that the alarm system Powermax sends and receives X10 commandos to control lights and apparatuses at a distance.

Module that controls the dull ignition and of apparatuses of low voltage or contacts without tension by means of a relay that admits a load max. of 5A to 24V. It has two ways of operation; Continuous and Momentary. It also works in manual and it can operate as an auxiliary timbre. It receives you order of any system of domótica x10.

New version of the radio receiver frequency. Besides being one of the basic components in applications of domótica, the new model is but small and has but sensitivity. The receiver receives the signals of the remote controls and you order sends them corresponding to ignite and to extinguish to lights and apparatuses. Each receiver is able to control up to 16 directions x10. Adema the own receiver works like a module of apparatus able to control a power of 1000 W.

Receiver of high quality able to receive the 256 possible codes of the domótica systems x10. Unlike the normal receivers that they only receive the 16 codes corresponding to one of the house codes, this receiver is able to receive all the codes of house, reason why it is essential in great domóticas facilities. Another added advantage is that the module includes an external antenna that is connected by means of a cable (including) so that we pruned to have one better reception of the signals from any point, since it is possible to be placed anywhere, including in the outside. This module needs the S110120 module UNIT Two-way traffic X10 to inject the signals received in the network of 220V.

Signal receiver X10 with interface series RS232 that allows to connect it to the PC directly. The receiver includes an external antenna with fixation support and a cable of 2 meters, that allows to place it in the suitable place but with the purpose of to have better reception and a greater rank of work. The receiver works class yet X10 codes, including the extended codes and the codes of security. Also, it works with repeaters and amplifiers that we had installed. He is compatible with the majority of the programs of automatization of home like: HomeSeer, MisterHouse, Home Assistant Control, Xtension and Indigo. Feeding: 7-12 Vdc. Consumption 30 mA. Frequency: 433.93 Mhz.

This micromodule you order sends them of dull ignition and of up to 4 directions x10 through the installation of 220v. Thanks to its small size, the micromodule settles in the same box of the present switches, which allows to use the present switch as control x10 and thus is not necessary to change the design of the switches. This micromodule allows to easily connect up to 4 different switches and program with any conventional control x10. Professional use. Measures 46 xs 46 xs 16 mm

The micromodule of lamp allows you order to send them of regulation of intensity, as well as of ignition and extinguished of up to 4 directions x10. Thanks to the small size of this micromodule, one settles behind the normal switches, allowing to use the present switches to ignite and to extinguish the lights of the domótico system without needing changing the design. The micromodule allows to easily connect up to 4 different switches and program with any conventional control x10. Professional use. Measures 46 xs 46 xs 16 mm.

The micromodule settles inside cajillo of the normal switches of wall. Besides sending and controlling 2 directions x10, this micromodule incorporates a normal module of apparatuses, reason why he is able to connect and to disconnect any apparatus locally. The micromodule allows to use the present switches to send you order x10 being avoided therefore having to change the design of the present switches. Measures 46 xs 46 xs 16 mm.

Micromódulo for installation inside cajillo of the European mechanisms standard. Micromodule AW12 is a module of apparatus able to control a load of until 2000 W in lamps or 3600 W of resistivas loads. The micromodule settles behind the plug that is wanted to control, being totally hidden and conserving the same existing mechanisms. Now it can have the plugs of his house under control, conectandolos only when it is necessary. It is very surely for the children, since the current cut in all those takings can be had that do not have anything connected. If it is desired, to a pulser or switch can be added that controls the dull ignition locally and.

Unit of lamp in format micromodule for its positioning inside the cajillos of the normal switches, so that it is not necessary to change the present mechanisms, besides being totally hidden. Micromodule LWM1 this especially indicated to ignite, to extinguish and to regulate the intensity of the lights of our home, being able to control up to 250 W of incandescent lamps or 200 W of halogenous lamps, including the lamps with transformer or electronic controller. Besides you order x10, a local pulser can be connected to ignite and to regulate the intensity of the lights. This module like the others are bidirectional, reason why besides receiving you order, also sends you order X10 when it is controlled locally, which allows to other systems like the interface for PC or other modules with its same direction to activate from this.

Microunit LW12 is an unit of X10 lamp able to control the ignition and the intensity of lamps of up to 250 watts of power. Microunit settles in the later part of the wall switch, within cajillo, allowing of this form to maintain the esthetic one of the switches who at the moment have themselves installed. Microunit is compatible with the lamps of low tension that use transformer as it is the case of the halogenous lamps and light bulbs of low tension. An important characteristic is that it does not need neutral to work, reason why is enough with putting in it in the present installation so that it works in the majority of the cases. Compatible with all the controls and X10 controller being able to assign anyone to him of the 256 directions available. Microunit can be controlled locally with the aid of a pulser that allows to apgar, to ignite and to regulate the intensity of the light.

The modules of domótica in format track DIN are standardized reason why its installation in any electrical picture is of easy assembly. This module can support to the domótico control of a whole electrical circuit of up to 3600 w. It includes local switch march, unemployment and car.

This module of domótica is connected to the circuit that we want to control in the electrical picture. It is designed to work with 230V, and lights including halogenous of 12 and 24v. It supports until 1000w of power in a same circuit. It has a pulser to be able to drive it directly.

This module is basically a filter that settles in track DIN of the electrical picture to prevent that the X10 signals interfere vice versa in other neighboring facilities and, that the external signals do not interfere either in our circuit. At the same time it serves to connect the three phases in case of three-phase installation.