UNIT OF LAMP WITH CABLE X10 S110112 Module Domótica X10 To interlock
Modules Domótica X10
That it is X10? 
24,18-Euro.
The form but easy and effective to control the lights of its house. The module of lamp with S110112 cable is along with the module of apparatus with S110117 cable, one of the pieces keys of any domótico system. These devices act like signal receivers X10, that is to say, receive an order through the electrical current to which they are connected they execute and it. In the case of the module of lamp with S110112 cable, that order can be to ignite, to extinguish, to attenuate or to intensify the light. W of power supports lights of up to 300.
How is received the signal? then, to each module one assigns to a consisting of code a number and a letter to him. As simple as to turn the frontal controls to the wished position. For example, the letter usually is the same for all the house: To, B, C, etc. We will assign a, and the number can be for example the 4. Which means that when we press a remote switch or control with a4 code, the lamp that is connected to this module will ignite. We can send the order to him to ignite, to go out, to attenuate the signal or to ignite the lamp very slowly like a regulator of normal light but all this at a distance.
VERY IMPORTANT: Any lamp or apparatus connected to a module of domoticaX10 can ignite and also go out of normal form from its own switch. That is to say, that besides working at a distance, continues working like before. If it loses the control or it does not have it by hand, one still does not worry can handle the lamp manually.
The products of domotica X10, have the advantage of which all are compatible among them, which means that independent of the mark or the manufacturer, all work equal and obey the same commandos. To ignite, to extinguish to attenuate and to intensify. Also all the ignited modules or all dull ones obey at your service of, very practitioner at the time of leaving house, arriving or when lying down.
Engineering specifications
| Tension feeding |
230 v 50 Hertz |
| Power |
60 - 300 W (Only incandescent lamps) |
| Emission staff |
It fulfills the norm IN 50081-1 |
| Emission EMS |
It fulfills the norm IN 50082-1 |
| Electrical security |
It fulfills the norm IN 60950 and 60065 |
| Sensitivity of signal |
15 mVpp min 50 mVpp max to 120 kHz |
| Impedance of entrance |
55 ohm (120 L-N) to Khz |
| Rank of temperature | ? A? º? G
-10ºC to 50ºC |
| Dimensions |
52 xs 122 xs 33 mm |
| Weight |
340 gr. |
Applications
It has manifolds applications since we have said it is a basic piece of the systems of domótica in the homes. It serves to connect all type of incandescent lamps (normal lamps) with the exception of the halogenous centers, that are to connect to a module of S110117.Una apparatus characteristic application can be the one to control the lamps of the hall with the same control tele (S110715 Kit de Basic Control) and thus to obtain the suitable illumination but at every moment. This module is controlled with anyone of the X10 Controls.
Installation
The installation is simple but it must become by somebody with electricity knowledge basic, since it requires electrical the direct manipulation of the cable. It does not forget to disconnect the electricity before making the connections. The entrance of network of 220V connects to a Blue neutral and Brown the phase. The lamp to control connects between the Blue phase and the Black that is the exit of the load.
Soon it assigns to the “code of house” (letter) and the “code of device” (number) with the dials located in the frontal part. If it wants simultaneously to ignite several lamps with the same switch, it will be enough whereupon it assigns the same codes to them.
Related products
PIDALO NOW AND RECIBALO TOMORROW!
24,18-Euro.
28,05 € with IVA
|
TO SEE MAS PRODUCTS DE Módulos Domótica X10
UNIT OF LAMP WITH CABLE X10 S110112
Module Domótica X10 To interlock
|