X10 UNIT FOR S110118 SOCKET Module of X10 Lamp for Socket.
Modules Domótica X10
That it is X10? 
14,61-Euro.
The new domótico unit of lamp that enrosca directly in the socket of the light bulb. Now it can control the ignition of any light or of interior or outside, since it is enough with enroscar unit in the place where before it was the light bulb. Unit is of ignited type and extinguished and supports 100 a fully factored load of W. The module responds the following you order of the X-10 standard:
- “ALL UNITS OFF” (All the Dull units) from any X-10 controller who agrees with the code of house of the module.
- “ON” (Ignited)
- “OFF” (Extinguished)
Easy to program, it is possible to be formed with any wished X-10 code.
APPLICATIONS
This module is used to control lights located in zones difficult like in gardens, exteriors or simply where is more comfortable its use. He is ideal to program scenes or simulations of presence from the INTERFACE PROGRAMMER FOR PC or to manually control the lights with any control of X-10 control.
- Simple to install in socket lamps
- It can be used from any X-10 controller.
- Ideal to implement controls of light without any type of work.
OPERATION
- 1. It disconnects the current. it unscrews the light bulb and castling the module in his place.
- 2. It places a lamp (until 100W in abiertas lamps, 60W maximum in closed lamps) in the module socket.
- 3. It reestablishes the current. The lamp will not shine.
- 4. It puts any X-10 controller in the code of House in which she wants to form his module of socket.
- 5. It presses three times, in intervals of 1 second, the code unit (that wishes to form in its module of socket) and the STARTUP CMD ON, in a period inferior to 30 seconds after to have ignited the lamp. To the third time that presses the code unit the lamp will ignite and the code will be stored in the memory of the module.
- 6. In order to return to change the code to the socket module, it extinguishes the lamp from his switch, returns to connect it and it follows the steps indicated in point 5.
230V/50Hz - 100W max. - The socket module does not attenuate lights.
Engineering specifications
| Tension of feeding |
230 V +-10%/50 Hertz |
| Power |
60 - 100 W (Only incandescent lamps) |
| Emission staff |
It fulfills the norm IN 50081-1 |
| Emission EMS |
It fulfills the norm IN 50082-1 |
| Electrical security |
It fulfills the norm IN 60950 and 60065 |
| Sensitivity of signal |
15 mVpp min 50 mVpp max to 120 kHz |
| Impedance of entrance |
>180 ohm (120 L-N) to Khz |
| Temperature operation |
-10ºC to 50ºC |
| Dimensions thread |
25.6 mm |
| Current feeding |
20 mA. |
Related products
PIDALO NOW AND RECIBALO TOMORROW!
14,61-Euro.
16,95 € with IVA
|
TO SEE MAS PRODUCTS DE Módulos Domótica X10
X10 UNIT FOR S110118 SOCKET
Module of X10 Lamp for Socket.
|