ADAPTER OF ALARM POWERFLASH S110122

Domótica:

Domótica controls x10

That it is X10?    

37,28-Euro.

The module powerflash sends a X-10 signal to the domótico system when it is activated by a movement detector, a photocell, a sensor of doors or windows etc. Have different ways from action, can ignite all the lights, put them in intermittent, activate a certain apparatus, like a siren, an equipment of music etc. The universal transmitter is a module that according to the state of the sensor connected in his contacts a X10 commando sends to the programmed control.

OPERATION

-1. It selects with the help of a screwdriver the Code of House and Unit.
-2. To place cables of the sensor in the tips of the module and to fit them with a screwdriver.
-3. The universal transmitter to the network fits.
-4. It selects one of the different ways to operate:

Selector of entrance A-B:

a. In this position the transmitter would be driven with an order of low voltage (6-18 V AC or DC)
b. The transmitter would be driven with a closing of dry contact.

Selector of way 1 - 2 - 3:

-1. The universal transmitter will ignite all the modules that you are fit in the same code of House and code of Unit that the universal module. When the alarm is deactivated, the illumination modules will remain ignitions whereas the rest of the modules fit in the same Code of House and Unit will go out.
-2. The universal transmitter will cause that the lights connected to the lamp modules that are in the same Code of House of the Adapter blink. All the modules of lamp will remain ignitions when the alarm is deactivated.
-3. The universal transmitter ignites any module fit in the same Code of House and Code of Unit that the Adapter, extinguishes and them when the alarm is readjusted.

TO NEVER CONNECT 220V IN the TERMINALS!

Engineering specifications

Related products

S110415 X10 FILTER COUPLER OF PHASES	With this filter x10 can make arrive the X10 signals from a circuit at another one. Special for facilities with several phases. 34,09 - €	S110412 UNIT OF X10 LAMP TRACK DIN	It installs east module of domótica track DIN in the electrical picture and at a distance controls complete circuits or with the computer. 29,09 - €	S110410 UNIT OF X10 APPARATUS TRACK DIN	It installs east module of domótica in format DIN for apparatus in the electrical picture and at a distance controls complete circuits or with the computer. 32,89 - €
S110128 UNIT RADIO RECEIVER X10 FREQUENCY	Receiver of radio frequency with apparatus unit that is essential in any domótica installation. 22,46 - €	S110125 UNIVERSAL UNIT X10	It closes a free contact of tension in response to a X10 order sent by the domotica system 34,35 - €	S110122 ADAPTER OF ALARM POWERFLASH	It allows that any Alarm or apparatus sends X10 signals when closing a contact to the dómotica system. 37,28 - €
S110120 UNIT Two-way traffic X10	Domotica. This module is an interface series to X10 protocol. It makes his devices compatible X10. 32,72 - €	S110118 X10 UNIT FOR SOCKET	Module of lamp x10 to connect directly in the socket of any lamp. It was never so easy to install domótica. 14,61 - €

PIDALO NOW AND RECIBALO TOMORROW!

37,28-Euro. 43,25 € with IVA

TO SEE MAS PRODUCTS DE Mandos Domótica x10

ADAPTER OF ALARM POWERFLASH S110122

Domótica: It connects any Alarm to the X10 System.