UNIVERSAL UNIT X10 S110125

Domótica:

Modules Domótica X10

That it is X10?    

34,35-Euro.

Module that controls the dull ignition and of apparatuses of low voltage or contacts without tension by means of a relay that admits a load max. of 5A to 24V. It has two ways of operation; Continuous and Momentary. It also works in manual and it can operate as an auxiliary timbre or both things simultaneously. It receives you order of any system of domótica x10.

In the way “Continuous” (Continuous) the relay or the sound stays fixed when the STARTUP CMD occurs or extinguished (“ON/OFF”).

In way “Momentary” (Momentary) when order “ON” occurs, the relay or the sound activate during 2 seg. prox. And they are deactivated after automatic form. If order “OFF” occurs, will be ignored.

The module has bellboys of “ON” and “OFF” (Ignited and Extinguished) for its activation manual.

APPLICATIONS

- Control of ignition/extinguished of apparatuses of low voltage or contact without tension by means of a relay.
- It can be used of momentary form (with ignition lag/extinguished in 2 seconds)
- A warning device Includes that announces its operation.
- Action of ignition/extinguished of apparatuses with action on free relays of tension or low voltage.
- Motor, electroválvulas, boilers of heating, etc.

OPERATION

1. With a screwdriver, to select the code of House and Unit.
2. To connect the application of low voltage in the Tips of module, and to fit them with a screwdriver (max. 24Vdc, 5A).
3. To connect the module to the mains.
4. It selects selectors in the position wished for his operation:

Left selector:
1. `Continuous' (Continuous): the relay or the sound stays fixed when the STARTUP CMD occurs or extinguished (“ON /OFF”).
2. `Momentary' (Momentary): when order “ON” occurs, the relay or the sound, activates during 3 - 5 seg. approx and they are deactivated after automatic form. If order “OFF” occurs, will be ignored.

Right selector:
1. Sounder Only (only the siren): When we send to him a STARTUP CMD to the module this will only act on the siren.
2. Sounder & Relay (siren and relay): In this position the module will act on the relay and the siren.
3. Only relay (Only relay): In this position the module would only act on the relay.
The relay of contact closing admits a fully factored load of 5 A. to 24 VDC.

TO NEVER CONNECT 220V IN the TERMINALS!

Engineering specifications

Related products

S110415 X10 FILTER COUPLER OF PHASES	With this filter x10 can make arrive the X10 signals from a circuit at another one. Special for facilities with several phases. 34,09 - €	S110412 UNIT OF X10 LAMP TRACK DIN	It installs east module of domótica track DIN in the electrical picture and at a distance controls complete circuits or with the computer. 29,09 - €	S110410 UNIT OF X10 APPARATUS TRACK DIN	It installs east module of domótica in format DIN for apparatus in the electrical picture and at a distance controls complete circuits or with the computer. 32,89 - €
S110128 UNIT RADIO RECEIVER X10 FREQUENCY	Receiver of radio frequency with apparatus unit that is essential in any domótica installation. 22,46 - €	S110125 UNIVERSAL UNIT X10	It closes a free contact of tension in response to a X10 order sent by the domotica system 34,35 - €	S110122 ADAPTER OF ALARM POWERFLASH	It allows that any Alarm or apparatus sends X10 signals when closing a contact to the dómotica system. 37,28 - €
S110120 UNIT Two-way traffic X10	Domotica. This module is an interface series to X10 protocol. It makes his devices compatible X10. 32,72 - €	S110118 X10 UNIT FOR SOCKET	Module of lamp x10 to connect directly in the socket of any lamp. It was never so easy to install domótica. 14,61 - €

PIDALO NOW AND RECIBALO TOMORROW!

34,35-Euro. 39,85 € with IVA

TO SEE MAS PRODUCTS DE Módulos Domótica X10

UNIVERSAL UNIT X10 S110125

Domótica: It controls any apparatus noncompatible X10.