UNIT RADIO RECEIVER FREQUENCY X10 S110128 Domotica:
Modules Domótica X10
That it is X10? 
22,46-Euro.
The receiver by radio frequency is along with the module of S110110 lamp, and a remote control, the three basic pieces of any system of domótica Its operation is the following one. We fit to network as much module of lamp as radio receiver frequency, and from remote control remote (or control X10) we emitted order that will be received via radio by radio receiver frequency, and that as well sends it by the mains so that the module of lamp when receiving extinguishes it, ignites, attenuates or intensifies the light to which it is connected.
As we know what module is the one that we want to control? Very simple a code, consisting of is assigned to each module (or of lamp or apparatus) a letter (house code) and a number (code of the apparatus). As simple as to turn the small wheels that bring in the frontal part to establish the code. The receiver by radio frequency can control up to 16 groups of modules with the same code of house. That is to say, if to our house we assigned letter to him D, we can control up to 16 modules with letter D, ex: D-1, D-4, D-15. We can send the order to him to ignite, to go out, to attenuate the signal or to ignite the lamp very slowly as if a regulator one was. The receiver by radio frequency is in itself an apparatus module that comes programmed with the code of unit 1 reason why if we activated the D-1 code from the remote control, the apparatus that is connected this module, would ignite if he is dull and it goes out if it is ignited since it acts like a relay.
VERY IMPORTANT: Any lamp or apparatus connected to a module of Dómotica X10 can ignite and go out of local form from its own switch.
The products of domótica X10, have the advantage that are compatible among them, which means that he is independent of the mark or the manufacturer, all work equal and obey the same commandos. To ignite or to extinguish and also obeys at your service of all the ignited modules or all dull ones, very practitioner at the time of leaving house, arriving or when lying down.
Engineering specifications
| Tension feeding |
230 v 50 Hertz |
| Current feeding |
< 20mA |
| Power |
500 W Lamp. Incandescent (1A motor) 10 A (resistance) |
| Emission staff |
It fulfills the norm IN 50081-1 |
| Emission EMS |
It fulfills the norm IN 50082-1 |
| Electrical security |
It fulfills the norm IN 60950 and 60065 |
| Frequency of RF |
433,92 Mhz. |
| Sensitivity of signal |
15 mVpp min 50 mVpp max to 120 kHz |
| Impedance of entrance |
180 ohm (120 L-N) to Khz |
| Rank of temperature |
-10ºC to 50ºC |
| Weight |
200 grs. |
| Dimensions |
65 xs 160 xs 33 mm |
Applications
To the being key piece in any system of domótica and automatization of his home, it is possible practically to be applied for all the cases in which it is wanted to control any remote device, from the dormitory, the kitchen, the garden or even from within of the car with the remote controls.
Related products
PIDALO NOW AND RECIBALO TOMORROW!
22,46-Euro.
26,05 € with IVA
|
TO SEE MAS PRODUCTS DE Módulos Domótica X10
UNIT RADIO RECEIVER FREQUENCY X10 S110128
Domotica: Receiving X10 Radio frequency with apparatus unit
|