UNIT OF X10 APPARATUS TRACK DIN S110410 Domótica:
Modules Domótica X10
That it is X10? 
32,89-Euro.
The module of domótica S110410 for track DIN especially is designed for the professional control of a whole electrical circuit. DIN standardized in the electrical picture mounts on a track. This module acts like a relay that can be controlled of remote form by means of X10 orders. Integra a red LED that is illuminated when the module is activated. It responds to orders of domótica X10 like all the ignited apparatuses/all the dull apparatuses.
Assembly
- In order to mount the module of S110410 apparatus on track DIN it is come from the habitual form, just as any other device DIN, rising the later eyelash and linking it in the track.
- The circular controls with the code get ready that we want to assign to him to this receiver, for example A-4. (16 letters and 16 numbers can be assigned up to). When we activate by means of a remote control or domótico controller east a-4 code device will respond to that order.
- The cables, A stage L are connected, neutral to N. Terminal 1 of the Module is designed to use a switch of wall with two states to control unit locally: the relay acts when it has voltage and it goes out when there is no tension in the terminal. Terminal 2 is designed for pulsers, whenever voltage is applied to him, the relay changes of state (of dull to ignition or vice versa). The correct operation of the module by means of the pulser can be verified that it has in the frontal part. The load is connected between the neutral N and exit L shoots with an arrow above.
- The direction can at any time be modified without having to disconnect no cable. What facilitates the reconstruction of our system of domótica
Wiring diagram of the unit of apparatus in track DIN.
In the frontal part it has a pulser with three positions “I”, “0” and “CAR”.
- In “I”, all the apparatuses connected to the electrical circuit will activate and it will be able to be deactivated neither with the switches nor with the remote controls. The LED will remain ignition.
- In “0”, it leaves disconnected totally all the circuit. The LED will remain dull.
- In “CAR”, it locates the circuit of such form that can be controlled by the different controllers, and switches.
Engineering specifications
| Tension feeding |
230 v 50 Hertz |
| Power |
2000 W (incandescent lamps), 600 W (motor), 3000W (resistance) |
| Emission staff |
It fulfills the norm IN 50081-1 |
| Emission EMS |
It fulfills the norm IN 50082-1 |
| Electrical security |
It fulfills the norm IN 60950 and 60065 |
| Sensitivity of signal |
15 mVpp min 50 mVpp max to 120 kHz |
| Impedance of entrance |
> 180 ohm (120 L-N) to Khz |
| Temperature operation |
-10ºC to 50ºC |
| Dimensions |
52 xs 122 xs 33 mm |
| Weight |
340 gr. |
Applications
This device can save the purchase to him of multiple X10 apparatuses if You normally have ignitions the same apparatuses, for example, heating/conditioned air, indirect lights, television, tablecloth lights of the hall, etc, with only activating a button, a switch, r or a remote control, You connect all this simultaneously. He can place a X10 switch in the recibidor of his house, and any more to enter when pressing it, placing his home in an pleasant atmosphere. Macros can be programmed also to be executed from this module. Simulators of presence for prolonged absences, etc.
Related products
PIDALO NOW AND RECIBALO TOMORROW!
32,89-Euro.
38,15 € with IVA
|
TO SEE MAS PRODUCTS DE Módulos Domótica X10
UNIT OF X10 APPARATUS TRACK DIN S110410
Domótica: Module Apparatus for Fixed Facilities.
|