UNIT OF X10 LAMP TRACK DIN S110412 Domótica:
Modules Domótica X10
That it is X10? 
29,09-Euro.
The module of domótica S110412 for track DIN especially is designed for the professional control of a whole electrical circuit. Standard DIN mounts on a track, in the electrical picture. This module is a remote receiver that can be controlled from any switch, controller or remote control of X10 orders. It responds to ignited orders like, all lights/all the lights extinguished, or to attenuate the signal of all the circuit to which it is connected. Optionally, a pulser can be connected to activate of form manual the module as if a normal switch it was. At the same time this pulser serves also like attenuator. Pressing briefly the circuit will activate it and returning it to beat of it will deactivate. If on the contrary we maintain it pressed all the lights connected to this circuit they will attenuate until going out or we stop beating. If we return to maintain it pressed, the lights will be winning in intensity. This module DIN, owns a denominated characteristic MEMORY DIM, that allows to remember the light level when it goes out, returning to recover cradled it ignites. Besides regulating normal incandescent lamps, the unit of lamp in track DIN, also he is able to regulate halogenous lights with transformer.
Assembly
- In order to mount the lamp module on the track DIN it is come from the habitual form just as any other device DIN, rising the later eyelash and linking it in the track.
- The circular controls with the code get ready that we want to assign to him to this receiver, for example A-4. (16 letters and 16 numbers can be assigned up to). When we activate by means of a remote control or domótico controller east a-4 code device will respond to that order.
- The cables, A stage entered L are connected, neutral to N. To connect the pulser between the phase and the terminal marked with 1. The load is connected between exit L shoots with an arrow superior above and the neutral one.
- The direction can at any time be modified without having to disconnect no cable.
It is important to disconnect the main magnetotérmico when one get ready to install this device of domotica.
This Module responds to the X10 orders of “all the ignited lights/all the lights extinguished”, as well as to the individual trainings “ignited” and “extinguished”.
The S110412 Module especially is designed to create ambient of hall and scenes of illumination, even with halogenous lights with transformer.
Engineering specifications
| Tension feeding |
230 v 50 Hertz |
| Power |
40 - 700 W (incandescent lamps) |
| Emission staff |
It fulfills the norm IN 50081-1 |
| Emission EMS |
It fulfills the norm IN 50082-1 |
| Electrical security |
It fulfills the norm IN 60950 and 60065 |
| Sensitivity of signal |
15 mVpp min 50 mVpp max to 120 kHz |
| Impedance of entrance |
>60 ohm (120 L-N) to Khz |
| Rank of temperature |
-10ºC to 50ºC |
| Dimensions |
80 xs 46x 65mm |
| Weight |
190 gr. |
Applications
This device allows a considerable saving of energy, since they are possible to be attenuated to the signal of a whole electrical circuit with only pressing a key. At the same time it can save the purchase to him of multiple X10 apparatuses. If for example You normally usually have the same lights to create atmosphere in their house, indirect picture lights, halogenous in bookcases, tablecloth lights of the hall, etc., with only activating a button, a remote switch, or control You you connect all this simultaneously. It can place a X10 switch in the recibidor of its house, and any more to enter when pressing it, placing its home in an pleasant atmosphere. He is ideal to establish cosy scenes with only pressing a button. Macros can be programmed also to be executed from this module. Domoticos simulators of presence for prolonged absences, systems, etc.
Related products
PIDALO NOW AND RECIBALO TOMORROW!
29,09-Euro.
33,75 € with IVA
|
TO SEE MAS PRODUCTS DE Módulos Domótica X10
UNIT OF X10 LAMP TRACK DIN S110412
Domótica: Module Lamp for Fixed Facilities
|