| |
X10 FILTER COUPLER OF S110415 PHASES Filter Coupler of X10 Phases Track DIN
Domótica accessories x10
That it is X10? 
34,09-Euro.

Cases exist in which the devices of X10 orders that You have installed in their home do not work correctly due to interferences in the network, or are coming from their same apparatuses, or of neighboring facilities. The S110415 module is a filter coupler of phases for track DIN that especially is designed to avoid all type of interferences. One settles in main the electrical picture of his house after the main differential and before the magnetotérmicos, of this form guarantees the isolation of all the circuit of his house, not only of the external disturbances but also of which it could originate his own installation. In case of three-phase facilities it connects the X10 signal to different phases.
Assembly

The filter coupler of phases settles as it shows the diagram after the main differential and before the different magnotetérmicos from each circuit. In the case of three-phase instalciones it will have to install a filter S110415 coupler by each phase to connect the X10 signal. The connection is the following one: L for the entrance of phase, N for neutral (both in the part of under Filtro) and above the L for the exit of phase. In facilities three-phase the S110415 filters are reconciled connecting terminals K when coming out of Phase of the following Filtro.Puede to observe the circuits in parallel of the furnace, the washing machine, and other circuits of iluminacón that are not controlled by X10 signals. It is important to disconnect the main magnetotérmico when one get ready to install this device.
Engineering specifications
| Tension feeding |
230 V. +/- 10- 15%, 50 Hertz. |
| Maximum current |
63 A. |
| Filtrate frequency |
120 kHz. |
| Band width |
5 kHz. minimum. (3 dB) |
| Attenuation Filter |
20 dB minimum without minimum current, 15dB to 63 A. |
| Inverse attenuation |
15 dB minimum. |
| Loss coupler |
2 dB max. to 120 Khz. |
| Impedance |
20 120 omhios minimum to kHz |
| Weight |
190grs. |
| Dimensions |
8 xs 3.5 6.5 xs cms. |
Applications
- This device allows the feedback of the phases in three-phase facilities for the reception of X10 orders.
- Installation in houses with problems of interferences through the mains.
- It isolates the house to avoid that the own X10 signals can interfere in other neighboring facilities.
Related products
PIDALO NOW AND RECIBALO TOMORROW!
34,09-Euro. 39,55 € with IVA

|
TO SEE MAS PRODUCTS DE Accesorios Domótica x10
X10 FILTER COUPLER OF S110415 PHASES
Filter Coupler of X10 Phases Track DIN
|
Up-to-date page the 25/03/2009 © 2000 - 2009 INTPLUS ®. All rights reserved
To go to the Main Page of consumer-watch-electronic.info
www.SuperRobotica.com Robotic Easy |
|