UNIT OF CONTROL IP XIKRA200 TRACK DIN S110450 Control of Relays and Sensors from Internet
Domótica accessories x10
258,92-Euro.
Module of control IP with two exits of relays and 4 digital entrances that allows him to control all class of sensors and to measure if these estan so working correctly with only acceding to direction IP. He is perfect to monitor devices of remote form. The control module is able to supervise the digital entrances, the temperature, the tension of feeding and the operativity of a remote equipment and each of these variables can activate or deactivate one or several action of the following: to act on some relay, to send email, to drive an acoustic warning device or to illuminate a LED in the frontal of the equipment.
Its operation is simple will be able to connect any sensor to this module of control and to read its state of remote form through Internet and to detect right away if its operation is the correct one. The control module will be connected to router ADSL to and of remote form it will be able to control the sensors and to activate the power relays to ignite or to extinguish what wishes. Imaginese for example to be able to make sure without having to personally go the good operation of its refrigerator chamber, does not risk to lose thousands of Euros in merchandize by which it could be avoided easily with a simple remote verification.
The module has track form DIN and counts on additional modules of track DIN like the power supply S110460 and the detector of S110462 current.
Between the most outstanding characteristics of this module of control IP they estan:
4 digital Entrances
It has 4 digital entrances that allow him to connect devices. 2 of the entrances are by closing of free contact of tension and the other 2 entrances are optoacopladas with ranks of entrance of 5 to 30V
Control of equipment IP
It allows to form up to 8 directions of which to him a PING will send and if ping of return does not take place automatically takes place a reseteo of the equipment that has not answered ping by means of the opening of some of the relays.
2 Exits relays
Account with two relays of power to connect and to disconnect devices. The relays can control of form manual through navigator of Internet or automatic form by the own controller in response to a digital entrance, a change of temperature or a voltage drop. The relays can work in time-lag way of up to 9999 seconds, in alternative way to the state of present work or in way connected or disconnected of permanent form.
Shipment of email
The module is able to send email of warning and notification based on anyone of the established conditions, for example when one of the entrances activates, or when certain temperature is reached, etc.
Acoustic warning device
Thanks to the acoustic warning device that incorporates it is possible to generate a continuous sound or a sound discontinued with a duration that goes from 1 9999 s to s. This sound allows to realize signals of warning and alarm of local form.
Leds of state
The equipment consists of 6 leds of alarm to each one of as different situations so that they ignite indicating different the alert status can be associated him. These have in the frontal of the same apparatus a space in target to place a indentificativa label to him. Of this form a single look is enough to know if everything is correct or an alarm has taken place.
Temperature sensor
The module of control IP incorporates a temperature sensor with a +/- precision 3º C that can be used to measure the room temperature. The sensor can be fit in such a way that it drives relays or it sends email if the temperature that detects this outside the established parameters.
Measurement of feeding tension
One of the characteristics that do of this very useful device is the power to detect if a failure in the electrical provision in those places exists where support batteries to the feeding for the apparatuses exist.
Communication RS-232 and Ethernet
Used ports to accede of remote form to the equipment.
Updates of the Firmware
In addition it allows him to make an update of firmware by means of the port series so that it at any moment has the last version of the same.
Examples of application:
- Detection of mechanical contacts (presostatos. relays, switches)
- Monitoring of temperature (datacenters, offices, warehouses)
- Warning and signaling through Internet
- Monitoring of fall on watch in servants, cameras IP
- Detection of intrusion, gas flights, floods
- Remote activation of devices (heating, lights, motors)
General characteristics
-2 active entrances by contact closing.
-2 entrances optoacopladas with ranks of entrance of 5 to 30V (current constant to 5mA).
-2 exits to relay, of 5 To 250 Vac, exchanged contacts.
- Connection by means of bornas screwed plug-in.
- Integrated Temperature sensor, with adjustment of you limit of work and generation of alarm.
- Measurement of feeding tension, with adjustment of you limit of work and generation of alarm.
- Warning hearing aid
-18 LEDs for visualization of entrances, exits, alarms and state.
- Connection series RS232 for configuration and maintenance.
- Ethernet 10 Base T
- Connection RS485 half duplex (3 threads) for future extensions.
- Web server for visualization, adjustments and control manual.
- He accepts commandos HTTP to act on the relays.
- Access to the variables in format XML to facilitate the integration of applications.
- Actualizable Firmware.
- Feeding: 8-30 Vdc.
- Consumption maximum model XIKRA200: 2.1 w.
- Assembly in track DIN 35 mm
Related products
PIDALO NOW AND RECIBALO TOMORROW!
258,92-Euro.
300,35 € with IVA
|
TO SEE MAS PRODUCTS DE Accesorios Domótica x10
UNIT OF CONTROL IP XIKRA200 TRACK DIN S110450
Control of Relays and Sensors from Internet
|