DECODER OF VIDEO BY 2140 NETWORK FLEXWATCH S130745 Visualizer of FlexWatch Servants without Computer.
Web servers of video
527,80-Euro.
 
FlexWatch 2140 is a decoder of video by network that allows to see the images coming from the Web servers of FlexWatch video in any television without needing computer. If it wants to watch the cameras of his business from his house, now it is but easy that then everything what must do never is to connect the decoder FlexWatch 2140 to line ADSL and its television. With the decoder it will be able to see up to 4 cameras different just by to change of channel in his own television.
Thanks to the ways of visionado Quad (4 cameras in the screen at the same time) and Sequential (1 camera in screen that is alternating the different channels) you can have a servant in Barcelona, another one in Madrid, another one in Seville and another one in Salamanca, and to have at the same time perfectly controlled all the instances from a single place. Its alarm system with sonorous signal of warning, alert him of immediate form if some intruder invades his facilities and shows in screen the images to him in direct. To maintain facilities never controlled has been so simple and so comfortable.
The decoder is compatible with the cameras and Web servers of FlexWatch video allowing to see the cameras of one in one, or up to 4 cameras of simultaneous form. The cameras can be anywhere of the world, even in the different premises and with dynamic IP, since the decoder is compatible with the servant AOIP who allows to locate his FlexWatch in the network although this he has IPdinámica.
Outstanding characteristics
- To decode the signal of video of network without needing computer
- It provides until 15fps by channel decoding 4 channels of video to CIF or 30fps decoding to 1/4CIF
- Interface series for the unit of audio FlexWatch V10, (nonavailable at the moment). In next updates of firmware the voice will be able to be transmitted and to be received.
- Transmisioin of data by ports RS-485 and RS-422. These can be used to connect devices like control panels of chambers with movement or similars.
- It supports dynamic IP through AOIP.
- Change of the way of vision in screen through button of the frontal panel or by configuration Web.
- Way unique channel, way quad or sequential way.
- Advanced notification of Alarm and services
- When some alarm activates or movement in the servants is detected, the decoder of video of network FlexWATCHTM 2140 shows the chamber immediately and gives a red alert.
- Button of restoration of factory configuration.
- Interface Web for local or remote simple administration.
Technical characteristics
| Hardware |
Independent system with own processor |
| Management |
Interface Web for administration and configuration of the equipment |
| Video |
Exit of analogical composite video (NTSC/PAL) Decoding and visualization of source MJPEG of 4 channels 15 images per second (Optimal Quality), 30 images per second (normal Quality) for each channel Three ways of visualization: to complete screen, way of quadrants or sequential way. Selection of ways of visualization through configuration or button |
| Port RS485 |
Interface RS-485 for conventional device of CCTV (Keyboard, remote controller, etc) (2005) |
| Port Network |
Interface of network LAN of 10/100-Base |
| Aux port |
Interface of Audio for connection of the Module of Audio (2005) |
| Warning device |
System of sonorous warning of alarm integrated Information in screen during reproduction for notification of movement and alarm. |
| Feeding |
12 volts |
| Temperature of work |
From 5º to 50º C |
| Compatibility |
FW-1110 FW-1160 FW-3110 FW-3440 FW-5440 |
| Dimensions |
14.5 cm (long) x 14 cm (wide) x 4.5 cm (thickness) 425 grams without feeder |
Related products
BEARINGS INCLUDING
PIDALO NOW AND RECIBALO TOMORROW!
527,80-Euro.
612,25 € with IVA
|
TO SEE MAS PRODUCTS DE Servidores video Web
DECODER OF VIDEO BY 2140 NETWORK FLEXWATCH S130745
Visualizer of FlexWatch Servants without Computer.
|